Nope, all my brand new 368's run with all my old 368's. I also have some 361's I got from overseas and there is a difference in speed so when the two are side by side you can tell.
I have a box of 368's I just received so if you are still worried that JR is pulling a fast one buy all my inventory of REAL 368's ASAP and put them to proper use! Tom Copp Composite Specialties www.f3x.com 949-645-7032 -----Original Message----- From: Les or Gypsy Stockley [mailto:[EMAIL PROTECTED] Sent: Tuesday, September 28, 2004 10:32 PM To: soaring Subject: [RCSE] DS368/361 Servo's Hi all, I have seen some discussion in the past about the 361 being identical to the 368, however I have found differing specs between the two. DS361 28x30x13mm 18g 0.15s/40deg DS368 28x30x13mm 22g 0.11s/40deg I believe the difference between the two is the 361 has a 3 pole motor whereas the 368 has a 5 pole, can anyone out there confirm this?? There were some rumours a number of months ago that the 368 was to be discontinued, does anyone know if JR Japan has simply been putting 368 stickers onto 361 servos for the US market, I have heard that from at least one source fairly close to JR Japan. Cheers, Les. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
