----- Original Message ----- From: "George Voss" <[EMAIL PROTECTED]>
> I'm ready to install my pushrods in my AVA. They are going to be run on the > outside of the fuse. Does anyone have a photo or 2 where they cut the pod > for the pushrods to exit? gv This link shows one guy's pushrod exit holes. http://www.rcgroups.com/forums/showpost.php?p=2091279&postcount=121 Over 350 postings about the Ava, construction photos, & flying are here: http://www.rcgroups.com/forums/showthread.php?t=173093 I don't have a photo of mine handy. I drilled small holes in the back of the fuse, a bit in front of the tailboom joint. Then I put a long circular file in my portable drill. Set the drill on reverse, and reamed the holes to the correct size and exit angle. If you need more info, I can supply a photo tonight. Jon RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
