Re: [RCSE] Mylars?

[Harley Michaelis]

I picked up some 1/4" square steel and cut it in 1' lengths. Laid at the 
ends of a carrier with cloth applied, it will stay flat while applying 
epoxy. Take the steel pieces off to catch where they laid.
----- Original Message ----- 
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, November 30, 2004 7:49 AM
Subject: [RCSE] Mylars?


This isn't exactly a drop-dead topic but does anyone have a trick for 
taking
the curl out of mylars before you first use them? It settles down after a
couple of cycles but that first layup is a bit of a fight. Tied them down 
and
used a heat gun this AM and it helps but....

TIA,
- Dave R
RCSE-List facilities provided by Model Airplane News.  Send "subscribe" 
and "unsubscribe" requests to [EMAIL PROTECTED]  Please note 
that subscribe and unsubscribe messages must be sent in text only format 
with MIME turned off.



RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]  Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.