I have enjoyed sloping my EPP P-38 and now want to electrify it by adding two speed 400 motors.
By reversing the wiring on one of the motors the motors now rotate in opposite directions.
It is not at all clear to me what kind of prop to put on the motor that is rotating clockwise (when viewed from the front). Simply putting a regular prop on backwards does not seem to provide thrust in the proper direction.
Suggestions appreciated.
I've had no problems reversing props, but on the smaller speed400 motors it can be hard to tell which edge is the leading edge on the small props.
You will also have to reverse the motor timing if your not using a motor setup for reverse rotation. On a speed400 this means rotating the end-plate, which requires a special tool to do it right.
-- Andrew E. Mileski
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.
