Do you recommend light, medium or heavy starch? Cliff Lindgren
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, December 28, 2004 5:53 PM To: [email protected] Subject: [RCSE] Mylar Curl A while back, suggestions were offered for taking the curl out of mylars that had been in storage for a long time. I've lost the original list but whoever suggested ironing, thank you, that REALLY worked. First time around I didn't get it hot enough but a new planform (and mylars) led to desperation and it was re-tried. At 'Perm Press' nothing happened. By 'Wool' it started to flatten out. When you get to 'Cotton' and beyond, the mylar may stretch and warp too much. So for you house-husband domestic types with curly mylars, set the iron between wool and cotton, add a little steam, cover the mylar with a light cotton towel and start ironing. Don't let it sit in any one place but keep going back and forth slowly for about 5 minutes. Flip it over and do it again. Let it cool down a bit under the towel and you'll have mylars that are REALLY flat. Thanks for the suggestion. Apologies for losing track of the original source. Hey, where did this pile of shirts come from?????? And this #**# apron????? - Dave R RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
