John, And yet another option -
I use Hysol 9460 a/b epoxy glue, also sold by Loctite. Clean w/ alcohol, sand carbon rod and also the inside of the brass fitting with a needle file - clean and dry again before final assembly. I did a 'hang test' on the assembly and it held 45 pounds overnight, decided to load it to 80 pounds, my jig started to come apart - figured I had a good joint at that point. Regards Ronald Mong Columbus, OH ----- Original Message ----- From: "John Fruge" <[EMAIL PROTECTED]> To: <soaring@airage.com> Sent: Monday, March 07, 2005 1:28 PM Subject: [RCSE] Carbon Pushrod Help! > I had a carbon pushrod brass end come off in flight over the weekend. I would like to hear options on putting on the brass ends to the carbon pushrods? > > Thanks, > > John Fruge > > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
