Re: [RCSE] 8103 programing problem flaps to ailerons then to crow

[Michael Lachowski]

Yes,  Use Mixer 2 as a curve (You probably have mixer 1 for 
spoi->elevator curve).  and mix SPOI->FPRN,  Play with the curve to get 
the effect you desire.  It might look V-shaped or if you don't use the 
BTF mixers at all on the ailerons, then the shape of the curve would be 
exactly what you want the ailerons to do.

Note that you can also do a SPOI-FPRN mix that gets turned on during 
launch and set up a V-shaped mix + one direction, - the other direction, 
so that you can increase differential on the ailerons on launch so they 
don't drop down any more when you use aileron.  Yes, you should be using 
rudder on launch but not everyone remembers to use the other stick.


Stan Myers wrote:
Is there a way to program the ailerons to the flaps for first 50% of 
travel, then the ailerons go neutral and then to "crow" as addition flap 
is dialed in?

TIA
Stan
RCSE-List facilities provided by Model Airplane News.  Send "subscribe" 
and "unsubscribe" requests to [EMAIL PROTECTED]  Please note 
that subscribe and unsubscribe messages must be sent in text only format 
with MIME turned off.  Email sent from web based email such as Hotmail 
and AOL are generally NOT in text format

.
RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]  Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.  Email sent from web based email such as Hotmail and AOL are generally NOT in text format