Hi Walter,
You're going to laugh, but do yourself a favour and try it before to dismiss it.
Tungsten is a wierd alloy, it can be cut extremely easily by certain things, like magazine cover paper.
You're laughing, I can hear you. Go try it and see. Use the paper the same way you would if you were trying to give yourself a papercut (don't), only use it to cut the tungsten. Make sure you use the back cover of a mag that's going to the recycling anyway, no need to mar a magazine you care at all for.
Dan
----- Original Message ----- From: "Marta Zavala" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Monday, March 14, 2005 11:52 AM
Subject: [RCSE] Tungsten Ballast
I have some 3/4 inch heavy tunsten alloy stock I need to cut. Do I have to have a machine shop cut it or is it possible to cut it at home with???? Thanks, Walter
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
