HOT WIRE FOAM CUTTING WING CORE TEMPLATES.
Last year I began cutting wing cores using the CNC approach. As a result
I now have a good number of laser-cut hot-wire templates for wing cores
that I need to get rid of. I am looking for a new home for them other
than Mt. Trashmore. Two sets of one-piece templates are of ¼” ply and
are for the *E193 and E205* for chords 4” to 13”. If you remember,
one-piece templates were affixed to the block of foam, and then two
people moved the cutting wire through the various stations around the
templates. There is a set of ¼” ply two-piece templates for the *SD7037*
chords from 4” to 14”. These are the normal “FeatherCut” templates for a
glass-skinned wing. There is a set of 1/4” ply two-piece templates for
the *RG15* in chord lengths of 4,6,8, and 10” plus templates for the
*SD7037* in 5” and 8”. These are also of the FeatherCut variety and for
glass skins. These were designed to cut the top surface of the cores
first to reduce the problem of climbing the upper surface hill. There
are numerous other templates, some laser cut and some handmade, for a
variety of foils and chords. Included are the S4083, RG15, and SD8020.
Anybody interested can drop me an e-note. I would like reimbursement for
the shipping only. WARNING: 1/4” ply is heavy!
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
