[RCSE] 4-servo flying wing / 8103 help

[Len Revelle]

I'm assembling a 100" EPP wing that uses a 50" center section and 25" 
tip sections. Each tip section has a servo/control surface and the 
center section has a pair of servos/control surfaces. The wing (Queen 
Bee) was designed to use y-servo connectors when assembled as a simple 
elevon wing , a la Zagi on steroids. I would like to try something more 
exotic like using the inboard surfaces as flaps or spoilers for landing. 
I will likely use the y-connectors initially to tweak CG and get used to 
the thing. I'll be using the 8103 and Berg 6 with HiTec 300 servos.

Question: Since the bird has to be set up with elevons, what is the best 
way to set up a 4-servo flying wing so that it has spoilers or flaps 
when using the 8103? Has any RCSE folk used such a wing?

--
    Len Revelle N9IJ
"My career goal is to retire"
RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]  Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.  Email sent from web based email such as Hotmail and AOL are generally NOT in text format