Len Revelle <[EMAIL PROTECTED]> wrote: >No instructions to be found. Can someone give me a listing of the >channel numbers (as labeled) vs their function on the Hitec Supreme 8? >I'm gonna use this in the 100" wing and need rt/left aileron and rt/left >flap channels.
That depends upon your radio, not your receiver. They have versions of the Supreme 8 for Futaba, Hitec, and JR/Airtronics radios, and the channel assignments are different according to which one of those radios you have. You need to consult the manual for your radio. Here's a page on the Hitec web site that might help you out a little: http://www.hitecrcd.com/Receivers/supremeairRX.htm For what it's worth, if you have a Hitec radio the FAQ on that page says this: >Q. What are the channel assignments? >A. Channel assignments are set by the transmitter being used. In the case of >Hitec, channel 1 is ailerons, channel 2 is elevator, channel 3 is throttle >and channel 4 is rudder. Sorry, but for some reason they stop at channel 4, so I know that's not very helpful. There's also a link on that page to the manual in PDF format, but there's not much to it: http://www.hitecrcd.com/bg/BlueMnaulFaq.gif Good luck! Mike -- Winch Solenoid Safety Buzzer - http://www.vvsss.com/buzzer/ _____ \__________________|__________________/ (O) RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
