"elcoba" <[EMAIL PROTECTED]> wrote:
>Hello all,
>Does anyone remember how to reverse a servo where you do not have the
>facility on the Tx. It has been so long since I last did this that I
>have totally forgotten. I do remember that two of the wires on the pot
>are to be interchanged, but which two?
The wires on the sides need to be swapped. The center wire (the wiper) should
stay where it is. If you have an ohmmeter you can make sure you've identified
the correct wires by ensuring that the resistance between them doesn't change
significantly as you rotate the potentiometer. If the resistance goes up and
down then one of those wires is the wiper.
The two connections to the motor have to be swapped as well.
WIPER
|
V
A--/\/\/\/\/\/\/--B
(Swap A and B.)
Mike
--
_____
\__________________|__________________/
(O)
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and
unsubscribe messages must be sent in text only format with MIME turned off.
Email sent from web based email such as Hotmail and AOL are generally NOT in
text format
