I first used the heavily textured toweling first and set the steam iron on
Linen. That resulted in a bit of texture transfer to the paint. Thereafter I
used the Wool setting, after first laying down the smoother cloth. This was
okay. A different iron may differ in temperature from mine at the same
settings.
----- Original Message -----
From: "George Voss" <[EMAIL PROTECTED]>
To: "'Harley Michaelis'" <[EMAIL PROTECTED]>; <[email protected]>
Cc: "'Laszlo Horvath'" <[EMAIL PROTECTED]>
Sent: Thursday, August 18, 2005 11:11 AM
Subject: RE: [RCSE] Tip on bagged wing twist removal.
You didn't mention if the towels left a pattern on the surfaces, but you
could have used .014" mylar on the skins and put the towels on the mylar.
You would need to determine how much heat the mylar could handle before
starting to be sure they wouldn't melt. Other than that, your plan sounds
good. gv
-----Original Message-----
From: Harley Michaelis [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 18, 2005 1:52 AM
To: [email protected]
Cc: Laszlo Horvath
Subject: [RCSE] Tip on bagged wing twist removal.
I had a 3 piece Genie Pro wing with a tendency to turn left. A twist of
about 1/16" was found...(snip)
RCSE-List facilities provided by Model Airplane News. Send "subscribe"
and "unsubscribe" requests to [EMAIL PROTECTED] Please note
that subscribe and unsubscribe messages must be sent in text only format
with MIME turned off. Email sent from web based email such as Hotmail and
AOL are generally NOT in text format
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe
messages must be sent in text only format with MIME turned off. Email sent from web based email
such as Hotmail and AOL are generally NOT in text format
