I'm gonna regret this some day, but I need some cash....
For Sale: 2 NIB Compulsions.
I had Fred make me a matched set, sorta.
Each fuse came with preinstalled push rods.
Wings for are each 126 inches. The ailerons were cut shorter than
usual so that a generous trileron could be installed.
Servo bays for the wing servos were cut for JR 368's at an angle
suitable for RDS installation. It's a trivial task to use a more
typical wing servo installation if you wish.
To say they are NIB is fibbing a little bit. I've installed the
servo tray and fuse servos (new Volz analog servos--optional for the
buyer), I've installed the stabilizer cranks and the rudder posts.
The nose cones are painted white (three coats of Krylon FUSION paint
with wet sanding and a final coat of clear-coat). The paint wasn't
so much for looks as to cover the electronic bits with white to cut
down on possible heat problems.
One plane is a 7035, one is an FS01.
A problem might be the wing rods. The stock wing rod is bent to
about 4 degrees. I bought an optional solid steel wing rod for windy
weather ballast, which has a recommended 6 degree bend. I took the
other stock aluminum wing rod and bent it to 8 degrees, just to have
something to play with. Depending on what the buyer wants or needs,
we'll work something out. They are 5/8 inch diameter, not the most
common size.
I would like $650 plus shipping for each plane without servos, or if
the buyer wishes, $700 with the two Volz fuse servos installed. If
one person would like both planes, they are both yours with servos
for $1375 plus shipping. I will give a preference for that type of
purchase (and save me the hassle of dealing with wing rods). Find a
local friend and buy them both and save a few buck$. If you only
want one plane, please let me know and I'll sell them separately as
need be. Please be patient as I will wait a bit for anyone who might
want to buy them both.
Please contact me off line if interested.
Cheers,
Bill
---
I've been rich and I've been poor. Rich is better. L. Reventlow
Bill Johns
Colton, WA
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe
messages must be sent in text only format with MIME turned off. Email sent from web based email
such as Hotmail and AOL are generally NOT in text format
