The Shrike, Elf and Shredder are all set to 0/0 just like Brian's ship. Ed ----- Original Message ----- From: "Brian Courtice" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, September 19, 2005 6:11 PM Subject: RE: [RCSE] How to mount a v tail
Try making a block that will sit on top of the v-tail at the root. (Angle the bottom of the block to match the v-tail angle.) Now you can set a small bubble level on the block to measure the v-tail incidence. Raise the tail until the bubble is perfectly centered, and then use a meter to set the wing incidence. I’ve never flown a Snipe, but I doubt you’ll need that much positive incidence. I’d start around 1 degree I think. (Enough to be sure it isn’t negative.) My own fast wingerons are set up at 0-0, or very close to it. -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.11.3/106 - Release Date: 9/19/2005 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.11.3/106 - Release Date: 9/19/2005 ---------------------------------------------------------------------------- ---- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.11.1/104 - Release Date: 9/16/2005 RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
