Fred;
Script is where you said it was,
It works:
Using bootes f14 (rawhide) 611 USB:
Mount
----clip---
/dev/sdc1 on /media/LIVE type vfat
(rw,nosuid,nodev,uhelper=udisks,uid=500,gid=500,shortname=mixed,dmask=0077,utf8=1,flush)
->TARGET
/dev/sdd1 on /media/Lexar type vfat
(rw,nosuid,nodev,uhelper=udisks,uid=500,gid=500,shortname=mixed,dmask=0077,utf8=1,flush)
->Source of Mirabelle.iso
[r...@localhost LiveOS]#
./livecd-iso-to-disk --format --reset-mbr --overlay-size-mb 800
/media/Lexar/Fedora-13-i686-Live-SoaS.iso /dev/sdc1
Verifying image...
/media/Lexar/Fedora-13-i686-Live-SoaS.iso:
0ce28e3947106fd37bab9317abf09938
Fragment sums:
a3c6e5fd5fba11d2b4da71771e8732b63bcb62b841971f7f39ab5c187f64
Fragment count: 20
Press [Esc] to abort check.
Checking: 100.0%
The media check is complete, the result is: PASS.
It is OK to use this media.
WARNING: THIS WILL DESTROY ANY DATA ON /dev/sdc!!!
Press Enter to continue or ctrl-c to abort
Warning: The resulting partition is not properly aligned for best
performance.
Waiting for devices to settle...
mkdosfs 3.0.9 (31 Jan 2010)
Copying live image to USB stick
Updating boot config file
Initializing persistent overlay file
800+0 records in
800+0 records out
838860800 bytes (839 MB) copied, 149.872 s, 5.6 MB/s
Installing boot loader
USB stick set up as live image!
[r...@localhost LiveOS]#
Confusing with 2 LiveOS locations.....
Thanks;
Tom Gilliard
satellit
Frederick Grose wrote:
On Fri, Jun 18, 2010 at 4:30 PM, Thomas C Gilliard <
[email protected]> wrote:
...
It will work better if script is located in / of compressed fs.
not in /mnt/live/LiveOS
I suggested it would be more useful in the primary device filesystem because
it could be more easily accessed without booting the image, and still be
accessed from the running image as shown below.
Frederick Grose wrote:
...
I just noticed though that it is the only file in the squashed file system
/LiveOS directory.
The various file systems are easily confused. The SquashFS I refer to just
above is the system that is the active root system for the booted Live USB
image. So, for example, in the booted SoaS in Terminal:
[r...@localhost ~]# ls -la /LiveOS/
total 32
drwxr-xr-x. 2 root root 4096 May 13 16:01 .
dr-xr-xr-x. 22 root root 4096 Jun 18 21:18 ..
-rwxr-xr-x. 1 root root 23040 May 13 16:01 livecd-iso-to-disk
--Fred
------------------------------------------------------------------------
_______________________________________________
SoaS mailing list
[email protected]
http://lists.sugarlabs.org/listinfo/soas
_______________________________________________
SoaS mailing list
[email protected]
http://lists.sugarlabs.org/listinfo/soas