The driver mapped only 128 bytes of the CAN controller address space when a CPC-PCI v2 was detected (incl. CPC-104P). This patch will fix it by always mapping the whole address space (4096 bytes on all boards) of the corresponding PCI BAR.
Signed-off-by: Sebastian Haas <[email protected]> --- drivers/net/can/sja1000/ems_pci.c | 8 +++++--- 1 files changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/can/sja1000/ems_pci.c b/drivers/net/can/sja1000/ems_pci.c index 7d84b8a..ba98063 100644 --- a/drivers/net/can/sja1000/ems_pci.c +++ b/drivers/net/can/sja1000/ems_pci.c @@ -94,12 +94,14 @@ struct ems_pci_card { #define EMS_PCI_CDR (CDR_CBP | CDR_CLKOUT_MASK) #define EMS_PCI_V1_BASE_BAR 1 -#define EMS_PCI_V1_MEM_SIZE 4096 +#define EMS_PCI_V1_MEM_SIZE 4096 /* size of PITA control area */ #define EMS_PCI_V2_BASE_BAR 2 -#define EMS_PCI_V2_MEM_SIZE 128 +#define EMS_PCI_V2_MEM_SIZE 128 /* size of PLX control area */ #define EMS_PCI_CAN_BASE_OFFSET 0x400 /* offset where the controllers starts */ #define EMS_PCI_CAN_CTRL_SIZE 0x200 /* memory size for each controller */ +#define EMS_PCI_CONTR_MEM_SIZE 4096 /* size of controller area */ + static struct pci_device_id ems_pci_tbl[] = { /* CPC-PCI v1 */ {PCI_VENDOR_ID_SIEMENS, 0x2104, PCI_ANY_ID, PCI_ANY_ID,}, @@ -266,7 +268,7 @@ static int __devinit ems_pci_add_card(struct pci_dev *pdev, goto failure_cleanup; } - card->base_addr = pci_iomap(pdev, base_bar, mem_size); + card->base_addr = pci_iomap(pdev, base_bar, EMS_PCI_CONTR_MEM_SIZE); if (card->base_addr == NULL) { err = -ENOMEM; goto failure_cleanup; -- EMS Dr. Thomas Wuensche e.K. Sonnenhang 3 85304 Ilmmuenster HRA Neuburg a.d. Donau, HR-Nr. 70.106 Phone: +49-8441-490260 Fax : +49-8441-81860 http://www.ems-wuensche.com _______________________________________________ Socketcan-core mailing list [email protected] https://lists.berlios.de/mailman/listinfo/socketcan-core
