CAN module on AM3517 requires programming of IO expander as part of init sequence - to enable CAN PHY. Added platform specific callback to handle phy control(switch on /off).
Signed-off-by: Sriramakrishnan <[email protected]> --- Addressed review comments and also added conditional compile macros to gaurd against multiple inclusion of header file. drivers/net/can/ti_hecc.c | 17 ++++++++++++++++- include/linux/can/platform/ti_hecc.h | 8 ++++++-- 2 files changed, 22 insertions(+), 3 deletions(-) diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c index df27d82..ceba29e 100644 --- a/drivers/net/can/ti_hecc.c +++ b/drivers/net/can/ti_hecc.c @@ -28,9 +28,11 @@ * .mbx_offset = 0x2000, * .int_line = 0, * .revision = 1, + * .transceiver_switch = hecc_phy_control, * }; * - * Please see include/can/platform/ti_hecc.h for description of above fields + * Please see include/linux/can/platform/ti_hecc.h for description of + * above fields. * */ @@ -220,6 +222,7 @@ struct ti_hecc_priv { u32 tx_head; u32 tx_tail; u32 rx_next; + void (*transceiver_switch)(int); }; static inline int get_tx_head_mb(struct ti_hecc_priv *priv) @@ -317,6 +320,13 @@ static int ti_hecc_set_btc(struct ti_hecc_priv *priv) return 0; } +static void ti_hecc_transceiver_switch(const struct ti_hecc_priv *priv, + int on) +{ + if (priv->transceiver_switch) + priv->transceiver_switch(on); +} + static void ti_hecc_reset(struct net_device *ndev) { u32 cnt; @@ -816,10 +826,13 @@ static int ti_hecc_open(struct net_device *ndev) return err; } + ti_hecc_transceiver_switch(priv, 1); + /* Open common can device */ err = open_candev(ndev); if (err) { dev_err(ndev->dev.parent, "open_candev() failed %d\n", err); + ti_hecc_transceiver_switch(priv, 0); free_irq(ndev->irq, ndev); return err; } @@ -840,6 +853,7 @@ static int ti_hecc_close(struct net_device *ndev) ti_hecc_stop(ndev); free_irq(ndev->irq, ndev); close_candev(ndev); + ti_hecc_transceiver_switch(priv, 0); return 0; } @@ -901,6 +915,7 @@ static int ti_hecc_probe(struct platform_device *pdev) priv->hecc_ram_offset = pdata->hecc_ram_offset; priv->mbx_offset = pdata->mbx_offset; priv->int_line = pdata->int_line; + priv->transceiver_switch = pdata->transceiver_switch; priv->can.bittiming_const = &ti_hecc_bittiming_const; priv->can.do_set_mode = ti_hecc_do_set_mode; diff --git a/include/linux/can/platform/ti_hecc.h b/include/linux/can/platform/ti_hecc.h index 4688c7b..af17cb3 100644 --- a/include/linux/can/platform/ti_hecc.h +++ b/include/linux/can/platform/ti_hecc.h @@ -1,3 +1,6 @@ +#ifndef __CAN_PLATFORM_TI_HECC_H__ +#define __CAN_PLATFORM_TI_HECC_H__ + /* * TI HECC (High End CAN Controller) driver platform header * @@ -23,6 +26,7 @@ * @mbx_offset: Mailbox RAM offset * @int_line: Interrupt line to use - 0 or 1 * @version: version for future use + * @transceiver_switch: platform specific callback fn for transceiver control * * Platform data structure to get all platform specific settings. * this structure also accounts the fact that the IP may have different @@ -35,6 +39,6 @@ struct ti_hecc_platform_data { u32 mbx_offset; u32 int_line; u32 version; + void (*transceiver_switch) (int); }; - - +#endif -- 1.6.2.4 _______________________________________________ Socketcan-core mailing list [email protected] https://lists.berlios.de/mailman/listinfo/socketcan-core
