From: David Miller <[email protected]> Date: Sun, 13 Feb 2011 10:52:16 -0800 (PST)
> From: Marc Kleine-Budde <[email protected]> > Date: Sat, 12 Feb 2011 18:18:37 +0100 > >> On 02/11/2011 11:17 AM, Bhupesh Sharma wrote: >>> Bosch C_CAN controller is a full-CAN implementation which is compliant >>> to CAN protocol version 2.0 part A and B. Bosch C_CAN user manual can be >>> obtained from: >>> http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/ >>> c_can/users_manual_c_can.pdf >>> >>> This patch adds the support for this controller. >>> The following are the design choices made while writing the controller >>> driver: >>> 1. Interface Register set IF1 has be used only in the current design. >>> 2. Out of the 32 Message objects available, 16 are kept aside for RX >>> purposes and the rest for TX purposes. >>> 3. NAPI implementation is such that both the TX and RX paths function >>> in polling mode. >>> >>> Signed-off-by: Bhupesh Sharma <[email protected]> >> >> Good work! >> >> Acked-by: Marc Kleine-Budde <[email protected]> > > Applied. Actually, I'm reverting because this causes build regressions: ERROR: "clk_get_rate" [drivers/net/can/c_can/c_can_platform.ko] undefined! ERROR: "clk_get" [drivers/net/can/c_can/c_can_platform.ko] undefined! ERROR: "clk_put" [drivers/net/can/c_can/c_can_platform.ko] undefined! _______________________________________________ Socketcan-core mailing list [email protected] https://lists.berlios.de/mailman/listinfo/socketcan-core
