Hello, I am using socketcan with a combination of 3 passive plx cards (1 dual channel and 2 single channel) on kernel 3.0.0-13. I have the libsocketcan-0.0.8 installed as well. I can use all 4 CAN channels but for some reason I can only use can_get_state() with the two single cards and the dual card returns -1 for both channels. I have attempted another setup this time with just the two single cards and when I use the can_get_state() I am able to only return the state on 1 of them. Then I attempted putting in the dual card alone and the same result, one channel works the other does not.
I would appreciate any advice, this seems like a strange problem to me. Mit freundlichen Grüssen / Yours sincerely, James Kime Entwicklung / Development -------------------------------------------- IXXAT Automation GmbH Leibnizstr. 15, 88250 Weingarten, Germany Phone +49-751-56146-181 Fax +49-751-56146-29 mailto:k...@ixxat.de http://www.ixxat.de -------------------------------------------- PRIVILEGED AND CONFIDENTIAL. Any unauthorized use or disclosure is strictly prohibited. -------------------------------------------- Sitz der Gesellschaft: Weingarten Handelsregister Ulm HRB 551905 Geschäftsführer: Dipl.-Ing. Christian Schlegel -------------------------------------------- _______________________________________________ Socketcan-core mailing list Socketcan-core@lists.berlios.de https://lists.berlios.de/mailman/listinfo/socketcan-core
