On Apr 30, 2007, at 10:54 PM, Wilkinson, Alex wrote:
0n Mon, Apr 30, 2007 at 11:22:09PM +0100, Matt Brown wrote:
On 4/30/07, abhimanyu gosain <[EMAIL PROTECTED]> wrote:
Hi
I have been trying to configure the hardware watchdog timer on
the soekris
4526 and havenot been able to get it to work.As far as i have
read the
timer is built in with the geode processor so it should have
shown up on
the
harware configuration.
Have anyone of you gotten the timer to work.If so,Please share your
experiences.
Depending on your kernel the following may be relevant:
http://www.mattb.net.nz/blog/2006/07/17/patching-the-sc520-
watchdog-to-reboot-soekris-devices/
Are there patches for {Free,Open}BSD anywghere ? Or does it "just
work" on these
platforms ?
It works just fine for me on FreeBSD, watchdog simply does not reset
the timer when the kernel goes awry, or if you use the -e option, you
have rather limitless possibilities of what is required to consider
the system in a "good" state.
-aW
IMPORTANT: This email remains the property of the Australian
Defence Organisation and is subject to the jurisdiction of section
70 of the CRIMES ACT 1914. If you have received this email in
error, you are requested to contact the sender and delete the email.
IMPORTANT: THIS email is the property of absolutely noone, it is
subject to the jurisdiction of my whims and notions, anyone who reads
this email shall be bound by any future whims or notions I have,
expressed or unexpressed.
_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech
_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech
