Thanks for the tip Martin- I think I mis-counted the devices in the BIOS list. I'll follow up over at leaf-user next week.
-bp [EMAIL PROTECTED] wrote: > Hi Ben, > >> > Martin, that's discouraging. Did a card with another chipset ever work >> > in the 4501? Maybe Netgate will swap for a card known to work in this >> > board. > yup, I've been using prism based cards on several 4501 boxes without any > problems. > And I stand corrected - since I wasn't able to find the post that I > remembered reading a long time ago, I simply tried it - and the CM9 > seems to work just fine in my 4501 (the drivers load and the interfaces > show up just fine) > So, please disregard anything I said about general issues with 4501 and > CM9 cards. I don't exactly remember what the issue was that I had with > 4501 boxes and Atheros cards in the past, and I can't reproduce it anymore. > > Taking a closer look at the BIOS messages you posted, it actually seems > like the card is recognized > >> > 0:16:0 168C 0013 02000001 0116 0290 10 3C 00 A0000000 00000000 10 > This should be the card, since Vendor ID 168C is "Atheros Communications > Inc.", according to http://www.pcidatabase.com > > So I guess the next question how you set up Bering uClibc - since this > is rather OT for this list, lets follow up on that on the leaf-user list. > >> > _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
