In message <[EMAIL PROTECTED]>, Erhard Schwenk writes: > > ConSpeed = 19200 > ConLock = Disabled > ConMute = Disabled > BIOSentry = Enabled > PCIROMS = Enabled > PXEBoot = Disabled > FLASH = Primary > BootDelay = 5 > FastBoot = Disabled > BootPartition = 3 > BootDrive = 80 81 F0 F1 > ShowPCI = Enabled > Reset = Hard
Hi Erhard, Try setting "BootPartition" to "Disabled". By the way, you want booting from the HDD, but the first device in BootDrive "80" is the CF (FLASH is set to primary). Perhaps you want to set the FLASH to secondary and HDD to primary or change the boot order. You will need to reconfigure the operating system if you change the CF to secondary. The HDD can be set to cable select. This way, you will be able to change CF/HDD settings from the comBIOS (at least if you are using a supported CF card). Cheers, Igor. _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
