Hi group,
I have a net4501-60 that I have installed Slackware 11 with a 2.6.20 kernel,
using a 4GB laptop drive. I want to duplicate this to a 2GB CF card. I'm
using about 1.2G of drive space currently. I've been unable to make the soekris
boot on CF.
On CF, I set up 1st partition as swap (256MB), then 2nd as ext2. With CF
mounted as hdb2, I ran "lilo -r /mnt/hdb2 -C /etc/lilo.conf". That was supposed
to take care of the boot sector. Then I copied the files over from HD to CF
from toplevel of HD root using cp -a (direrctory), one at a time . After that,
I set flash=primary from soekris BIOS. When I try to boot, I get kicked back
to the BIOS menu, BIOS say "no boot device available". Boots fine from HD
after I set flash=secondary.
Can anyone offer advice? Thanks for your time.
Dave
Best Regards,
Dave Cohen
[EMAIL PROTECTED]
---------------------------------
Yahoo! oneSearch: Finally, mobile search that gives answers, not web links. _______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech
