I didn't make any changes, that's the odd thing. I just unplugged it so I could move some stuff around, and when I went to plug it back in it will not POST with the CF card inserted.
Just for kicks I tried flashing back to an older combios, but same results (so I flashed back to 1.30). Jason comBIOS ver. 1.30 20070326 Copyright (C) 2000-2005 Soekris Engineering. net45xx 0064 Mbyte Memory CPU 80486 133 Mhz Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int ------------------------------------------------------------------- 0:00:0 1022 3000 06000000 0006 2280 00 00 00 00000000 00000000 0:20:0 100B 0020 02000000 0107 0290 00 3F 00 0000E001 A0000000 10 5 Seconds to automatic boot. Press Ctrl-P for entering Monitor. comBIOS Monitor. Press ? for help. > show ConSpeed = 19200 ConLock = Enabled ConMute = Disabled BIOSentry = Enabled PCIROMS = Disabled PXEBoot = Enabled FLASH = Primary BootDelay = 5 FastBoot = Disabled BootPartition = Disabled BootDrive = 80 81 F0 FF ShowPCI = Enabled Reset = Hard -----Original Message----- In message <[EMAIL PROTECTED]>, Jason Rabel writes: > Oddly enough, when I removed the CF card and powered it on, it would boot. [...] > I'm at a loss... Anyone have any ideas? Hi, Jason. Can you send the output of your current comBIOS configuration to this mailing list? No need to fear the worst yet. Cheers, Igor. _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
