At 12:20 AM 6/25/2007, Neal R wrote:
> I will admit to a desire to have more than just a terminal server -
>a proper FreeBSD box with several RS-232 ports and at least two ethernet
>interfaces would be an absolute joy. Is there a low power RS-232 card
>that would work in the 4801? Where could I get a 1U case that would fit
>such a thing?
There is a commell board I use with FreeBSD that works OK.
sio0: <Oxford Semiconductor OX16PCI954 UARTs> on puc0
sio0: type 16550A
sio0: unable to activate interrupt in fast mode - using normal mode
sio1: <Oxford Semiconductor OX16PCI954 UARTs> on puc0
sio1: type 16550A
sio1: unable to activate interrupt in fast mode - using normal mode
sio2: <Oxford Semiconductor OX16PCI954 UARTs> on puc0
sio2: type 16550A
sio2: unable to activate interrupt in fast mode - using normal mode
sio3: <Oxford Semiconductor OX16PCI954 UARTs> on puc0
sio3: type 16550A
sio3: unable to activate interrupt in fast mode - using normal mode
See the list archives for some caveats. As for case, not sure
---Mike
_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech
