OK, I know what controls this from happening, but I dont understand
why. Its a FreeBSD thing, but I will followup here since I know a
few people use nanobsd on the Soekris boxes.
Basically, if I comment out
hint.sio.0.flags="0x10"
or
hint.uart.0.flags="0x10"
from /boot/device.hints
I get the RAM disks mounted twice ?!
I tried on a CURRENT version of nanobsd on a 5501 and the same thing.
For my app, I want to use the serial port from userland, but I must
comment it out of device.hints, otherwise, I cannot change the speed
of the port from userland.
---Mike
At 11:04 PM 7/3/2007, Mike Tancsa wrote:
>I have an odd situation where /etc and /var seem to be mounted twice
>now for some reason.
>
># df
>Filesystem 1K-blocks Used Avail Capacity Mounted on
>/dev/ad0s1a 245239 98076 127544 43% /
>devfs 1 1 0 100% /dev
>/dev/md0 4526 1784 2380 43% /etc
>/dev/md1 27990 124 25628 0% /var
>/dev/md2 4526 1788 2376 43% /etc
>/dev/md3 27990 436 25316 2% /var
>
>Any idea why this might be happening ? Its nanobsd off RELENG_6 on a
>Soekris 4511.
>
> ---Mike
>
>--------------------------------------------------------------------
>Mike Tancsa, tel +1 519 651 3400
>Sentex Communications, [EMAIL PROTECTED]
>Providing Internet since 1994 www.sentex.net
>Cambridge, Ontario Canada www.sentex.net/mike
>
>_______________________________________________
>Soekris-tech mailing list
>[email protected]
>http://lists.soekris.com/mailman/listinfo/soekris-tech
_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech
