Thanks, Soren. --Mark
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Soren Kristensen Sent: Wednesday, July 18, 2007 4:38 PM To: RB Cc: [email protected] Subject: Re: [Soekris] Comm Port Help! Hi, RB wrote: > On 7/17/07, Bob Camp <[EMAIL PROTECTED]> wrote: >> Yes, I would *think* that the bios and grub settings are not going to >> impact what happens once the kernel is up. The problem is a kernel >> resource conflict rather than a bios of boot loader problem. > > I concur. If you can at all, leave grub pointing at the console, > since it will only use it at boot. That way you have a last-ditch > window to recover a system without desoldering. Fyi, no matter what comBIOS settings or operating system you have you can always get into the comBIOS using Ctrl-P during POST, and there boot PXE and reinstall whatever software you have on the soldered on flash.... Best Regards, Soren Kristensen CEO & Chief Engineer Soekris Engineering, Inc. _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
