Hi Tom,
Maybe this applies to your experiment as well: http://lists.freebsd.org/pipermail/freebsd-doc/2006-September/011105.html Looks quite similar at a glance. Bill On Tue, 2007-07-24 at 23:09 -0400, Tom Mazzotta wrote: > I have been trying to use the procedure on the ultradesic.com website to > install FreeBSD 6.2 on to a net4801-60. I have basically tried 4 permutations > of the install using the boot image file downloaded from Ultradesic vs. > patching the standard bootonly ISO image w/ recompiled PXEBOOT, LOADER, and > KERNEL files (all built according to the Ultradesic procedure and sample > config's). I also tried using FreeBSD vs. Windows XPP (w/Tftpd32) as my > DHCP/TFTP server. No success with any of the scenarios. Typically, the > following is what I see: > > comBIOS ver. 1.31 20070408 Copyright (C) 2000-2007 Soekris Engineering. > net4801 > 0256 Mbyte Memory CPU Geode SC1100 267 Mhz > Pri Mas FUJITSU MHN2100AT LBA Xlt 1024-255-63 9820 Mbyte > Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int > ------------------------------------------------------------------- > 0:00:0 1078 0001 06000000 0107 0280 00 00 00 00000000 00000000 > 0:06:0 100B 0020 02000000 0107 0290 00 3F 00 0000E101 A0000000 10 > 0:07:0 100B 0020 02000000 0107 0290 00 3F 00 0000E201 A0001000 10 > 0:08:0 100B 0020 02000000 0107 0290 00 3F 00 0000E301 A0002000 10 > 0:10:0 104C AC23 06040002 0107 0210 08 3F 01 00000000 00000000 > 0:18:2 100B 0502 01018001 0005 0280 00 00 00 00000000 00000000 > 0:19:0 0E11 A0F8 0C031008 0117 0280 08 38 00 A0003000 00000000 11 > 1:00:0 100B 0020 02000000 0107 0290 00 3F 00 0000D001 A4000000 05 > 1:01:0 100B 0020 02000000 0107 0290 00 3F 00 0000D101 A4001000 11 > > comBIOS Monitor. Press ? for help. > > boot f0 > NSC DP83815/DP83816 Fast Ethernet UNDI, v1.03 > Copyright (C) 2002, 2003 National Semiconductor Corporation > All rights reserved. > Pre-boot eXecution Environment PXE-2.0 (build 082) > Copyright (C) 1997-2000 Intel Corporation > > CLIENT MAC ADDR: 00 00 24 C8 B4 F8 > CLIENT IP: 192.168.168.11 MASK: 255.255.255.0 DHCP IP: 192.168.168.38 > GATEWAY IP: 192.168.168.1 > PXE Loader 1.00 > Building the boot loader arguments > Relocating the loader and the BTX > Starting the BTX loader > Consoles: internal video/keyboard > BIOS drive C: is disk0 > PXE version 2.1, real mode entry point @9e64:00f6 > BIOS 639kB/261120kB available memory > FreeBSD/i386 bootstrap loader, Revision 1.1 > ([EMAIL PROTECTED]<mailto:[EMAIL PROTECTED]>, Tue Jul 24 17:18:00 EDT 2007) > pxe_open: server addr: 192.168.168.38 > pxe_open: server path: /pxeroot > pxe_open: gateway ip: 0.0.0.0 > NFS MOUNT RPC error: 60 > \ > can't load 'kernel' > Type '?' for a list of commands, 'help' for more detailed help. > OK > ------- > By examining the log from Tftp32, I can tell the PXEBOOT was sent to the box, > but it doesn't get an further: > > Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:00:24:C8:B4:F8 [24/07 > 23:05:12.250] > DHCP: proposed address 192.168.168.12 [24/07 23:05:14.468] > Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:00:24:C8:B4:F8 [24/07 > 23:05:14.468] > DHCP: proposed address 192.168.168.12 [24/07 23:05:15.984] > Rcvd DHCP Rqst Msg for IP 0.0.0.0, Mac 00:00:24:C8:B4:F8 [24/07 23:05:18.421] > Previously allocated address 192.168.168.12 acked [24/07 23:05:20.468] > Connection received from 192.168.168.12 on port 2070 [24/07 23:05:20.781] > Read request for file <boot\pxeboot>. Mode octet [24/07 23:05:20.781] > OACK: <tsize=219136,> [24/07 23:05:20.781] > Using local port 1679 [24/07 23:05:20.781] > Peer returns ERROR <TFTP Aborted> -> aborting transfer [24/07 23:05:20.781] > Connection received from 192.168.168.12 on port 2071 [24/07 23:05:20.875] > Read request for file <boot\pxeboot>. Mode octet [24/07 23:05:20.875] > Using local port 1680 [24/07 23:05:20.875] > <boot\pxeboot>: sent 429 blks, 219136 bytes in 1 s. 0 blk resent [24/07 > 23:05:21.015] > Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:00:24:C8:B4:F8 [24/07 > 23:05:21.765] > DHCP: proposed address 192.168.168.12 [24/07 23:05:23.265] > Rcvd DHCP Rqst Msg for IP 0.0.0.0, Mac 00:00:24:C8:B4:F8 [24/07 23:05:23.265] > Previously allocated address 192.168.168.12 acked [24/07 23:05:24.765] > ------- > > Since I am a newbie at this I'm not sure what to try next. Has anyone > successfully used the Ultradesic procedure to install FreeBSD on a 4801 w/ > comBIOS ver. 1.31? If so, what is the trick to getting it to work? Thanks in > advance! > > -tm > _______________________________________________ > Soekris-tech mailing list > [email protected] > http://lists.soekris.com/mailman/listinfo/soekris-tech > -- "Fix bugs first, add features later" _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
