thx to all of you ..... reading all your tips gave me the solution at
the end and it was not a HW issue, which was my own conclusion at
some point
1) first of all I compiled the kernel wrongly with the GEODE options ... hmm
2) I made a new kernel compile with CPU_ELAN & CPU_SOEKRIS and all was done
Pretty good:
remote refid st t when poll reach
delay offset jitter
==============================================================================
*193.162.159.194 .GPS. 1 u 66 128 377 14.820 6.138 0.640
+193.162.145.130 .GPS. 1 u 6 128 377 13.678 5.837 2.356
+194.239.134.10 .GPS. 1 u 70 128 377 15.274 4.469 1.038
+193.162.146.10 .GPS. 1 u 6 128 377 14.818 5.668 0.858
with a drift file value = -6.592
best regards ervin
On 19/08/07, Michael Sierchio <[EMAIL PROTECTED]> wrote:
>
> Read the soekris-list archives. There are kernel configuration
> issues that affect your OS clock accuracy, as well as the fact
> that some crystals have a different frequency from what you
> might assume.
>
> In general, I have not seen an off-the-shelf computer that was
> better as a stable timekeeping source than a 4501, and
> I have purchased at least a half dozen.
>
> - Michael
> _______________________________________________
> Soekris-tech mailing list
> [email protected]
> http://lists.soekris.com/mailman/listinfo/soekris-tech
>
--
mvh/best regards ervin
_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech
