Tuomo Latto wrote:
> Does anybody happen to know the status of these
> http://www.soekris.com/Issue0003.htm
> with regard to Freebsd 6-STABLE?
> How much manual patching is required?
>
> Are the instructions in http://63.249.85.132/geode.html
> still needed? How valid are they?
>
> I suspect I might be hitting the 64K transfer issue
> (hard hang, no other hints whatsoever) with jailed, nullfs
> mounted bitflu when running (unmodified) 6.x from 2.5" drive
> (57231MB <HTS548060M9AT00 MGBOA53A> at ata0-master UDMA33).
Forgot to mention that I'm running comBIOS 1.30.
I also seem to be hitting the issue with a simple "make buildworld".
That should be a little more easier for other people to test.
Although I admit, that might not be any easier to debug.
As for what I've ruled out... Not much.
It can't be the power, since I've also tried with another
power source (12V/5A).
I've run smartctl selftests and checked the SMART error logs.
Nothing could be found there.
Overheating? Possible, but the box isn't *that* hot to touch.
It's merely warm.
I don't know how useful this is, but after the hang if I don't
do a cold boot (by holding the reset button pressed for awhile),
the HD isn't shown on boot messages and the board tries a PXE boot.
When the PXE boot doesn't work, the comBIOS console appears. After
a cold boot ("reboot") the HD is once again found.
(If it wasn't for the Fujitsu drive in the original post on the
"5501 reboot problem" thread, I might see a pattern there.)
> Anything else I should know about?
Or any more details I should be telling you?
--
Tuomo
... And don't start a sentence with a conjunction
_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech
