On Sat, Oct 20, 2007 at 01:10:09PM -0500, Emilio Perea wrote: > On 2007/05/10 13:51, Soren Kristensen wrote: > > The net4801 added support for DMA on the CompactFlash from PCB rev 3, > > dated 040226. If you have an older board then you will need to tell > > the ATA driver to disable DMA, as it will detect that the disk support > > DMA but don't know it's not wired.... > > If you have an older board like mine, you'll have to change the wd > driver flags to 0x0ff0 using config -e or build a custom kernel.
Anybody know if it is possible to determine the revision (or the manufactoring date) of the PCB from software? Regards, Brix -- Henrik Brix Andersen <[EMAIL PROTECTED]>
pgpuDxNdBr1Ju.pgp
Description: PGP signature
_______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
