Hello Richard, On Sat, 2007-11-03 at 23:45 +0300, Richard Storm wrote: > Hello! > > I am trying to get SATA and ATA and CF working together on net5501.
Just out of curiosity: are you just testing your Soekris box to it's limits, or do you really want to use it this way? Or, hope you don't mind a bit of friendly sarcasm: do you own a car and does it run on diesel, petrol, LPG, solar power _and_ fuel cells? Simultaneously? Come on, give your Soekris box a break! And CF card master/slave problems have been reported over and over again on this list, better consult the card manufacturers. A list of troublesome cards would probably be a nice addition to the Wiki, but solutions for this issue so far seem beyond the soekris-tech range. Bill > SATA and ATA comes up fine: > comBIOS ver. 1.32i 20071005 Copyright (C) 2000-2007 Soekris Engineering. > net5501 0512 Mbyte Memory CPU Geode LX 500 Mhz > Pri Mas WDC WD800JD-75JNA0 LBA Xlt 1024-255-63 78 Gbyte > Pri Sla IBM-DBCA-206480 LBA Xlt 789-255-63 6342 Mbyte > > But when I insert CF card - ATA gets lost: > Pri Mas WDC WD800JD-75JNA0 LBA Xlt 1024-255-63 78 Gbyte > Pri Sla ULTIMATE CF CARD 2GB LBA Xlt 1007-64-63 2005 Mbyte > > However I have set FLASH=Secondary: > > show > ConSpeed = 19200 > ConLock = Enabled > ConMute = Disabled > BIOSentry = Enabled > PCIROMS = Enabled > PXEBoot = Enabled > FLASH = Secondary > BootDelay = 5 > FastBoot = Disabled > BootPartition = Disabled > BootDrive = 81 80 F0 FF > ShowPCI = Enabled > Reset = Hard > > Any suggestions how to get them all together? > _______________________________________________ > Soekris-tech mailing list > [email protected] > http://lists.soekris.com/mailman/listinfo/soekris-tech > -- "Ask not what it's for, ask what you can do with it." _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
