Never mind! I found my problem. I inadvertently had another TFTP application running in the background that I was not aware of.
_____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Heather Lockridge Sent: Tuesday, November 06, 2007 2:27 PM To: David Burke; [email protected] Subject: Re: [Soekris] Loading Linux Image on NET4526 Excuse my top posting. Are you forgetting to configure the tftp server part of this? For example, a snippet of a dhcpd.conf which works is: allow booting; allow bootp; class "pxeclients" { match if substring(option vendor-class-identifier, 0, 9) = "PXEClient"; next-server 192.168.1.121; filename "linux-install/pxelinux.0"; } This tells the PXEClient to look in the directory /tftpboot/linux-install for the file pxelinux.0 And an ls -l /tftpboot/linux-install shows: -rw-rw-r-- 1 root root 12952 Sep 18 17:23 pxelinux.0 drwxr-xr-x 2 root root 4096 Sep 12 15:27 pxelinux.cfg The directory pxelinux.cfg holds the file often named "default" which itsels contains the instructions for the kernel boot HTH Heather ----- Original Message ---- From: David Burke <[EMAIL PROTECTED]> To: [email protected] Sent: Tuesday, November 6, 2007 1:58:22 PM Subject: [Soekris] Loading Linux Image on NET4526 I am trying to load a Linux image onto a new net4526 board and I am not having any luck. For reference, I want to load this image (previously used on a net4501) using a Windows based PC. I have read every possible posting I can find on how to do this and still have not been successful. The closest thing I have found is http://pyramid.metrix.net/trac/wiki/InstallingPyramid/PxeBootWin. I have followed the procedures in that link the best I can but still have problems. Basically, I can get the board to obtain an IP address via DHCP, but then I get the error "PXE-E3B: TFTP Error - File Not found". The Windows firewall is disabled Below is the dhcpd.conf file I am using. Since I cannot find any detailed log related to the error, I can only assume it cannot find the file "pxelinux.0" which I have put in the TFTP directory as specified in the procedure. # dhcpd.conf # # Configuration file for ISC dhcpd (see 'man dhcpd.conf') # ddns-update-style none; subnet 192.168.200.0 netmask 255.255.255.0 { range 192.168.200.2 192.168.200.2; ## # If 192.168.200.1 is also an internet gateway and you # want your PXE booted device to be able to route to it on # boot, uncomment these lines. ## # option routers 192.168.200.1; # option domain-name "metrix.net"; # option domain-name-servers 192.168.200.1; allow booting; allow bootp; next-server 192.168.200.1; filename "pxelinux.0"; max-lease-time 60; default-lease-time 60; } -----Inline Attachment Follows----- _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
_______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
