nevermind, i'm retarded. I was overlooking the option to enable the tty console for the serial device.. it was in the off state.
On Nov 18, 2007 3:26 PM, Lyle Scott III <[EMAIL PROTECTED]> wrote: > also, to elaborate on earlier.. .here is the boot process: > system post (i can see great) > scrolling cursor with no text for a few seconds > normal tinybsd init (i can see great) > date... then nothing after that. I can't type or anything.. it > seems unresponsive. > (video of the whole startup: http://www.epoxysbox.org/100_0020.mov) > > hm, i have BIOS to 9600 and put comconsole_speed="9600" & > console="comconsole" in /boot/loader.conf on the tinybsd filesystem. > > do i need to do anything to /etc/ttys? I copied over the /etc/ttys > from my regular fbsd 6.2 base system to the tinybsd /etc file system > because there was nothing there. > > it still freezes after the date... with no change really. I am > assuming everything would be at 9600, or no? > > On Nov 18, 2007 8:16 AM, Bob Camp <[EMAIL PROTECTED]> wrote: > > > Hi > > > > The point it stops at is roughly the end of the boot process. More or > > less the choices on the list are: > > > > 1) It locked up running a local init script > > 2) You switched baud rates between the boot process and login process > > 3) A local script sent a string or flipped a pin that has your > > terminal locked up > > > > In cases 2 and 3 the Soekris will only feed you more data if you give > > it a proper carriage return. > > > > Bob > > > > > > > > On Nov 18, 2007, at 4:27 AM, Lyle Scott III wrote: > > > > > Hey, i am using a net4511 board with a 32MB compact flash card. I > > > followed the instructions on the TinyBSD web sites for installation. > > > Everything seems to work find during the boot process but right near > > > the end it freezes. > > > > > > screenshot: http://www.epoxysbox.org/netprob.gif > > > > > > It shows the date, then about 6 random characters immediately after > > > then quits responding completely. I have tried multiple kernels *full > > > kernel, chopped kernel* and don't know where else to turn. > > > > > > I'm pretty new at embedded anything and am an avid user of fbsd, but > > > this is really awesome and am looking forward to learning MUCH more! > > > > > > -- > > > > > > Lyle Scott, III > > > http://www.portcitycs.com > > > [EMAIL PROTECTED] |#| 910-231-0906 > > > > > _______________________________________________ > > > Soekris-tech mailing list > > > [email protected] > > > http://lists.soekris.com/mailman/listinfo/soekris-tech > > > > > > > > > > > -- > > Lyle Scott, III > http://www.portcitycs.com > [EMAIL PROTECTED] |#| 910-231-0906 > -- Lyle Scott, III http://www.portcitycs.com [EMAIL PROTECTED] |#| 910-231-0906 _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
