Hi I keep a "good" CF and power supply around. If the board does not boot with them I send it back to Soekris.
The regulators are pretty obvious on the board. You can check a good board and get the voltages on the big capacitors. I have never found a problem that way, so I stopped doing it. I have seen very few bad boards, so maybe it's a good idea. Bob On Nov 26, 2007, at 7:09 AM, Matteo Basso - Net Stop Snc wrote: > Hi, > last week a net4801 has crash from our customer. After some test (ext > psu, compact flash and board) we have changed all. > The old board with new ext. psu don't boot new CF (reset every time at > grub) and the cf on new board start perfectly. > > Now I'll test the board but how can I test Soekris Board? > Do You know some hardware test? > > Matteo > -- > Matteo Basso > email: matteo [at] netstop.it / www.netstop.it / www.kraba.it > Net Stop Snc - Soluzioni Informatiche > Str. Statale Sup. 11 verso VR, 257 > 36100 Vicenza (VI) - Italy > Tel. +39 0444 521129 > Fax. +39 0444 809885 > > > _______________________________________________ > Soekris-tech mailing list > [email protected] > http://lists.soekris.com/mailman/listinfo/soekris-tech > _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
