Hi Folks!

I have a brandnew Soekris 5501 with one compact flash, and 2,5" HDD.
After the installation of Linux/Gentoo I looked forward to update the
bios(read about some dma-troubles with bios 1.32). So I downloaded
1.32i and made a bios-update: no problem.
But after this Bios spank I'm unable to boot anything.
Here we go:

net5501       

0512 Mbyte Memory                        CPU Geode LX 500
Mhz                                                             

Pri Mas  SAMSUNG HM160HC                 LBA Xlt 1024-255-63  134
Gbyte Pri Sla  ELITE PRO CF CARD 1GB           LBA Xlt 1007-32-63  1015
Mbyte                                                                       

Slot   Vend Dev  ClassRev Cmd  Stat CL LT HT  Base1    Base2
Int
-------------------------------------------------------------------
0:01:2 1022 2082 10100000 0006 0220 08 00 0:06:0 1106 3053 02000096
0117 0210 08 40 00 0000E101 A0004000 11 0:07:0 1106 3053 02000096 0117
0210 08 40 00 0000E201 A0004100 05 0:08:0 1106 3053 02000096 0117 0210
08 40 00 0000E301 A0004200 09 0:09:0 1106 3053 02000096 0117 0210 08 40
00 0000E401 A0004300 12 0:17:0 168C 0013 02000001 0116 0290 08 40 00
A0010000 00000000 15 0:20:0 1022 2090 06010003 0009 02A0 08 40 80
00006001 00006101 0:20:2 1022 209A 01018001 0005 02A0 08 00 00 00000000
00000000 0:21:0 1022 2094 0C031002 0006 0230 08 00 80 A0020000
000000 0:21:1 1022 2095 0C032002 0006 0230 08 00 00 A0021000 00000000
07                                                                 

 1 Seconds to automatic boot.   Press Ctrl-P for entering
Monitor.                                                                  

Intel UNDI, PXE-2.0 (build 082)                               
Copyright (C) 1997,1998,1999  Intel
Corporation VIA Rhine III Management Adapter v2.43
(2005/12/15) PXE-E61: Media test failure, check
cable                                        

PXE-M0F: Exiting Intel PXE ROM.                               

No Boot device available, enter
monitor.                                        


comBIOS Monitor.   Press ? for help.                                    

> show

ConSpeed = 19200
ConLock = Enabled
ConMute = Disabled
BIOSentry = Enabled
PCIROMS = Enabled
PXEBoot = Enabled
FLASH = Primary
BootDelay = 5
FastBoot = Disabled
BootPartition = 1
BootDrive = 81 80 F0 FF
ShowPCI = Enabled
Reset = Hard

> boot 81
GRUB Loading stage1.5.


GRUB loading, please wait...
Error 25


Before that update boot was ok. Can't find any Problem. And about the
grub-e 25. The CF is fully readable on my later client-copmputer(s).

Kind regards,

Weilie

_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech

Reply via email to