Thanks for all the answers. I did a test today and it worked quite fine. On Sat, 2008-02-16 at 15:38 +0100, Wim Vandeputte - Mailinglists only wrote: > yes this works just fine > > Have a look at this picture: http://soekris.kd85.com/images/dsc07080.jpg > > it's the same cable we use on the 4801 and 4501 > > > On Sat, Feb 16, 2008 at 12:58:22PM +0100, Stefan Schulze Frielinghaus wrote: > > Hello, > > > > there is still no manual for the net5501 but I have a question regarding > > "internal" power supply. The manual for net4801 says that the JP10 can > > be used to supply power instead of the front board power supply. Is this > > still true for the net5501 board? > > > > Quote of the net4801 manual: > > JP10, DC Power > > 6 pins AMP MTA100 header, for connecting of internal power supply. Also > > has 2 of the GP IO pins, for use with advanced power management. Can be > > used with a 5V DC power supply if pin 3 and 4 are connected together, or > > with a 6V to 28V DC power supply if only pin 3 are used. When the board > > is viewed as on the illustration, pin 1 is the top pin, at the JP10 > > text. > > > > Is this also still true? Can someone confirm this? > > > > Best regards > > Stefan > > > > > > _______________________________________________ > > Soekris-tech mailing list > > [email protected] > > http://lists.soekris.com/mailman/listinfo/soekris-tech
_______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
