In message <[EMAIL PROTECTED]>, [EMAIL PROTECTED] o writes: >Hi all, > >Is it possible to access the comBIOS via the second com port? I >connected the GPIO pins 18-20 (RX, TX, GND) to my USB/serial converter, >it works fine with linux as /dev/ttyS1, but i also want to control the >BIOS and PXE boot as well.
As far as I know, there is no way to make comBIOS use the second com port, short of a recompile. -- Poul-Henning Kamp | UNIX since Zilog Zeus 3.20 [EMAIL PROTECTED] | TCP/IP since RFC 956 FreeBSD committer | BSD since 4.3-tahoe Never attribute to malice what can adequately be explained by incompetence. _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
