Hi all, I'm in the process of updating my two Soekris boards (net4511 and net4521) to Linux kernel 2.6.25-rc8-mm1 to support new Cardbus device driver modules. No matter what I try, I can't seem to get ide0 to come online during boot, and it reports "DISABLED, NO IRQ." There were no problems under 2.6.19-rc1-mm1, but several kernel config options have changed since then. Is there something I'm missing? I am admittedly somewhat green in the area of kernel config, but this seems to be my only hitch so far. Google searches and combings of the tech list are coming up empty. Console boot output below. Any suggestions or insight would be greatly appreciated.
Thanks, Joe 2.6.19-rc1-mm1 --------------------------- Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hda: LEXAR ATA FLASH, CFA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: 251904 sectors (128 MB) w/1KiB Cache, CHS=984/8/32 2.6.25-rc8-mm1 --------------------------- Uniform Multi-Platform E-IDE driver ide0: DISABLED, NO IRQ ide0: failed to initialize IDE interface _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
