>>>>> "phk" == Poul-Henning Kamp <[EMAIL PROTECTED]> writes:
phk> The UDMA33/UDMA66 cable recognition depends on one particular phk> wire to be not connected as far as I recall. My guess is that phk> soren connected that. It's up to the system BIOS to configure this depending on whether pin 34 in the cable connector is grounded or not. Last I looked Søren returned 0 in both config register bits for 80-wire cable (IDE_CFG[17:16]). Assuming the wiring is in place on the board, the correct solution would be for comBIOS to set the appropriate bit to 1 when the SATA bridge is being used. -- Martin K. Petersen http://mkp.net/ _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
