Don't use Grub. It is way too beefy for what you need. Use syslinux! It's much simpler, and easier. Additionally, it is far more mature than the grub project.
Eternity wrote: > Hi! > > I have a problem with a whole bunch of NET5501:s. I have read some posts > with similar problems, but not exactly this, I think, so I post my > problem: > > On a Cold boot my CF Card is detected: > > Pri Mas CF CARD 1GB LBA Xlt 983-32-63 990 Mbyte > > Then at boot: > > GRUB Loading stage1.5. > > GRUB loading, please wait... > Error 25 > > --- > > If I press ctrl-p, and at once in combios makes a "reboot" everything > works OK, and GRUB can load correctly. > > I have used lots of net5501 boxes with this distribution (same image file > I write to the CF card) without any trouble at all. I have tried upgrading > BIOS to 1.33c version, but no change. > > Any ideas? Could it be the flash card? Or some defect on these batch of > boards? > > Regards, > Chris > > > _______________________________________________ > Soekris-tech mailing list > [email protected] > http://lists.soekris.com/mailman/listinfo/soekris-tech > -- +1.925.202.9485 Sargun Dhillon deCarta [EMAIL PROTECTED] www.decarta.com _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
