I have a Net4501 board running the most recent version (i.e. 1.0b5) of Pyramid Linux and I'm getting low throughput (< 13Mbps) through the wireless interface. The same exact hardware setup I am using (i.e. the 4501 board, Radio Card, etc.) has been tested with other router software and I have no problem getting throughput in excess of 16 Mbps, so I know the hardware is good.
I have setup Pyramid Linux in both a router configuration and bridge and there is no difference in the throughput. I have forced the rate to 54M, which made no difference and also have tried all of the 802.11a channels and 802.11g channels just to make sure I didn't have an interference problem. I read one posting (http://dl.metrix.net/pipermail/pyramid-linux/2007-January/000151.html) where another person was having this same problem and Metrix supposedly fixed it by modifying the kernel config file which I assumed was in the latest release. I'm not sure how to even check this. Any ideas what might be causing this low throughput? _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
