Hi tokind,

On Fri, 2008-08-01 at 13:43 -0700, tokind wrote:
> I built a FreeBSD 6.2 server according to the instructions in Michael R.
> Brumm's article @
>  http://www.michaelbrumm.com/how-to-install-freebsd-pxe.html
> 
> I am connecting the net4501 directly to the nic on the server, so there is
> no router involved. I set the router address same as the host address.
> 
> The only thing different from the instructions was in the section on
> Configure the TFTP Directory section: There is no /cdrom/kernel directory to
> copy. I used /cdrom/boot/kernel instead. It was the only kernel directory I
> could find.
> 
> When I attempt to boot from the net4501 console I get a Client IP
> 10.22.0.100, and a DHCP IP 10.222.0.1 (which is the IP of my server). Then I
> get many attempts to pxe boot like so:
> 
> FreeBSD/i386 bootstrap loader, Revision 1.1
> [EMAIL PROTECTED], Day, Date, etc.
> pxe_open: server addr: 0.0.0.0
> pxe_open: server path: /cdrom
> pxe_open: gateway ip: 10.222.0.1
> pxe_open: server addr: 0.0.0.0
> pxe_open: server path: /cdrom
> pxe_open: gateway ip: 10.222.0.1
> pxe_open: server addr: 0.0.0.0
> pxe_open: server path: /cdrom
> pxe_open: gateway ip: 10.222.0.1
> start not found
> pxe_open: server addr: 0.0.0.0
> pxe_open: server path: /cdrom
> pxe_open: gateway ip: 10.222.0.1
> |
> pxe_open: server addr: 0.0.0.0
> pxe_open: server path: /cdrom
> pxe_open: gateway ip: 10.222.0.1
> pxe_open: server addr: 0.0.0.0
> pxe_open: server path: /cdrom
> pxe_open: gateway ip: 10.222.0.1
> pxe_open: server addr: 0.0.0.0
> pxe_open: server path: /cdrom
> pxe_open: gateway ip: 10.222.0.1
> pxe_open: server addr: 0.0.0.0
> pxe_open: server path: /cdrom
> pxe_open: gateway ip: 10.222.0.1
> pxe_open: server addr: 0.0.0.0
> pxe_open: server path: /cdrom
> pxe_open: gateway ip: 10.222.0.1
> pxe_open: server addr: 0.0.0.0
> pxe_open: server path: /cdrom
> pxe_open: gateway ip: 10.222.0.1
> can't load 'kernal'
                  ^   ?????????????

Typo in the boot config file?

Bill

> I've gone over the NFS and RPC configuration and the build instructions
> several times. Not sure what to look at next.
-- 
"There is nothing to worry about" - unknown

_______________________________________________
Soekris-tech mailing list
Soekris-tech@lists.soekris.com
http://lists.soekris.com/mailman/listinfo/soekris-tech

Reply via email to