I seem to have screwed up my console settings on a net4801 running
OpenBSD, so that there is no boot prompt.  It works fine when booting or
running as well as on the ComBIOS, but there is no boot prompt and any
keyboard activity during the time I expect the boot prompt to be visible
results in a lockup requiring a reset.

It used to work fine, so I must have changed something accidentally.  I
would appreciate any suggestions you can give me.

*----------------------------------------------------------------------*
% tip -19200 tty00
connected


OpenBSD/i386 (foo.bar.perea.net) (tty00)

login: /etc/rc.shutdown in progress...
/etc/rc.shutdown complete.
syncing disks... done
^Mrebooting...

POST: 012345689bcefghipsajklnopqr,,,tvwxy


comBIOS ver. 1.33  20080103  Copyright (C) 2000-2007 Soekris Engineering.

net4801

 CPU Geode SC1100 267 Mhz
 ...

 1 Seconds to automatic boot.   Press Ctrl-P for entering Monitor.
Using drive 0, partition 3.
Loading...
probing: pc0 com0 com1 pci mem[639K 127M a20=on] 
disk: hd0+
>> OpenBSD/i386 BOOT 2.13
|/-\|/-switching console to com0

[ using 622768 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2008 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 4.4 (GENERIC) #1020: Mon Aug 11 13:33:52 MDT 2008
    [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC" 
586-class) 267 MHz
cpu0: FPU,TSC,MSR,CX8,CMOV,MMX
cpu0: TSC disabled
real mem  = 133787648 (127MB)
avail mem = 120946688 (115MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 20/80/03, BIOS32 rev. 0 @ 0xf7840
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc8000/0x9000
cpu0 at mainbus0
 ...
starting network daemons: dhcpd sendmail ftp-proxy inetd sshd.
starting local daemons:.
standard daemons: cron.
Tue Aug 12 13:40:19 CDT 2008

OpenBSD/i386 (foo.bar.perea.net) (tty00)

login:

*----------------------------------------------------------------------*
_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech

Reply via email to