Nagilum wrote: > ----- Message from [EMAIL PROTECTED] --------- > Date: Thu, 04 Sep 2008 01:12:20 -0400 > From: "Ryan Rawdon" <[EMAIL PROTECTED]> > Subject: [Soekris] net5501 FreeBSD install - console useless after > loader > To: [email protected] > > >> I am PXE booting a FreeBSD 7 install, using 9600 8n1 for everything. >> The PXE boot portion of it seems to be working fine. The loader (as you >> can see below) works with the console/serial output and shows the entry >> point for the kernel. As soon as the kernel begins loading, a bunch of >> garbled-looking output scrolls by on the bottom line of the console very >> rapidly and then stops with the terminal's cursor indented 5 spaces on >> the bottom line (at the [ in the output below) >> > > ----- End message from [EMAIL PROTECTED] ----- > > My guess is you have something like this: > > BOOT_COMCONSOLE_SPEED=19200 > > in your /etc/make.conf . > Build your kernel with matching commspeed. >
I am currently using 9600 for the BIOS and aim to use 9600 for everything on this board. Does FreeBSD default to using 9600? _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
