At 09:08 AM 9/12/2008, jkv wrote:
>Hi,
>
>I recently switched from OpenBSD to FreeBSD and are having some trouble
>reading the temperature/voltage sensors on my Soekris 5501.
>Which FreeBSD tools are you guys using to read the temperature off yous
>Soekris 5501?
Hi,
Take a look at /usr/ports/sysutils/env4801. It works for the
5501 as well
# env5501 -i
# env5501
VREF = 1.235 V245 = 2.450
Temp 2 (status=0x81) 47 C
Volt 1 VCORE 106 1.253 V scale 1.0 1.253 V +/- 0.0118 V
Volt 2 VCC 214 2.529 V scale 2.0 5.059 V +/- 0.0236 V
Volt 3 VPWR 50 0.591 V scale 20.1 11.878 V +/- 0.2376 V
Volt 4 +12V 210 2.482 V scale 4.8 11.988 V +/- 0.0571 V
Volt 5 -12V 212 2.506 V scale 19.2 -12.491 V +/- 0.2268 V
Volt 6 GND 221 2.612 V scale 1.0 2.612 V +/- 0.0118 V
Volt 7 Vsb 140 1.655 V scale 2.0 3.309 V +/- 0.0236 V
Volt 8 Vdd 140 1.655 V scale 2.0 3.309 V +/- 0.0236 V
Volt 9 Vbat 255 3.014 V scale 1.0 3.014 V +/- 0.0118 V
Volt 10 AVdd 0 0.000 V scale 2.0 0.000 V +/- 0.0236 V
---Mike
_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech
