What is the max current allowed or recommended for the JP10 (DC Power)
on the Net5501s?
The external power supply is rated for 1.5 A DC but I suspect that would
burn the metal off the board ...
Section 3.7 of the Net4801 mentions the voltage, but not the current.
3.7 JP10, DC Power
6 pins AMP MTA100 header, for connecting of internal
power supply. Also has 2 of the GP IO pins, for
use with advanced power management. Can be used with a
5V DC power supply if pin 3 and 4 are
connected together, or with a 6V to 28V DC power supply
if only pin 3 are used. When the board is viewed
as on the illustration, pin 1 is the top pin, at the
JP10 text.
Function Pin Number
GND 1
GND 2
VPWR 3
+5V 4
GPIO 4 5
GPIO 0 6
http://www.soekris.com/manuals/net4801_manual.pdf
regards,
-Lars
_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech
