I just bought a usb2 soy memory and I have this output:

with dmesg, in a soekris net5501.

ehci_hcd 0000:00:15.1: setting latency timer to 64                              
                             
ehci_hcd 0000:00:15.1: EHCI Host Controller                                     
                             
ehci_hcd 0000:00:15.1: new USB bus registered, assigned bus number 1            
                             
ehci_hcd 0000:00:15.1: request interrupt 15 failed                              
                             
ehci_hcd 0000:00:15.1: USB bus 1 deregistered                                   
                             
ehci_hcd 0000:00:15.1: init 0000:00:15.1 fail, -16                              
                             
ehci_hcd: probe of 0000:00:15.1 failed with error -16                           
                             
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver           
                             
ohci_hcd 0000:00:15.0: setting latency timer to 64                              
                             
ohci_hcd 0000:00:15.0: OHCI Host Controller                                     
                             
ohci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1            
                             
ohci_hcd 0000:00:15.0: request interrupt 15 failed                              
                             
ohci_hcd 0000:00:15.0: USB bus 1 deregistered                                   
                             
ohci_hcd 0000:00:15.0: init 0000:00:15.0 fail, -16                              
                             
ohci_hcd: probe of 0000:00:15.0 failed with error -16   

lsusb does not report nothing.

lspci output is this:
00:01.0 Host bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] 
Host Bridge (rev 33)
00:01.2 Entertainment encryption device: Advanced Micro Devices [AMD] Geode LX 
AES Security Block
00:06.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 
96)
00:07.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 
96)
00:08.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 
96)
00:09.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 
96)
00:14.0 ISA bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA 
(rev 03)
00:14.2 IDE interface
: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE (rev 01)
00:15.0 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] 
OHC (rev 02)
00:15.1 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] 
EHC (rev 02)


do I missing something?  Can anyone running linux list what modules do you 
have loaded?

TIA

On Tuesday 06 January 2009 06:20:07 Wim Vandeputte Mailing list only wrote:
> 2.0
>
> On Mon, Jan 05, 2009 at 11:01:49PM -0600, Luis Daniel Lucio Quiroz wrote:
> > Hi
> >
> > Soekris net5501 has usb 1.1 or 2.0 bus?
> >
> > TIA
> >
> > LD
> >
> > _______________________________________________
> > Soekris-tech mailing list
> > [email protected]
> > http://lists.soekris.com/mailman/listinfo/soekris-tech


_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech

Reply via email to