my Cf card is a SanDisk Ultra II 4GB I did the installation of an Ubuntu describe here http://wiki.soekris.info/Installing_Ubuntu_7.04_Server_via_debootstrap
And when the soekris starts , I got the normal message : comBIOS ver. 1.33b 20080501 Copyright (C) 2000-2008 Soekris Engineering. net5501 0512 Mbyte Memory CPU Geode LX 500 Mhz Pri Mas SanDisk SDCFH2-004G LBA Xlt 995-128-63 4013 Mbyte Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int ------------------------------------------------------------------- 0:01:2 1022 2082 10100000 0006 0220 08 00 00 A0000000 00000000 10 0:06:0 1106 3053 02000096 0117 0210 08 40 00 0000E101 A0004000 11 0:07:0 1106 3053 02000096 0117 0210 08 40 00 0000E201 A0004100 05 0:08:0 1106 3053 02000096 0117 0210 08 40 00 0000E301 A0004200 09 0:09:0 1106 3053 02000096 0117 0210 08 40 00 0000E401 A0004300 12 0:17:0 1814 0301 02800000 0117 0410 08 40 00 A0008000 00000000 15 0:20:0 1022 2090 06010003 0009 02A0 08 40 80 00006001 00006101 0:20:2 1022 209A 01018001 0005 02A0 08 00 00 00000000 00SanDisk 000000 0:21:0 1022 2094 0C031002 0006 0230 08 00 80 A0010000 00000000 07 0:21:1 1022 2095 0C032002 0006 0230 08 00 00 A0011000 00000000 07 4 Seconds to automatic boot. Press Ctrl-P for entering Monitor. comBIOS Monitor. Press ? for help. > show ConSpeed = 19200 ConLock = Enabled ConMute = Disabled BIOSentry = Enabled PCIROMS = Enabled PXEBoot = Disabled FLASH = Primary BootDelay = 5 FastBoot = Disabled BootPartition = Disabled BootDrive = 80 81 F0 FF ShowPCI = Enabled Reset = Hard CpuSpeed = Default > boot 80 And then the system freeze ! Can anyone help ? I red on this list that SanDisk are good CF, and without any debug message, I can't do anything thanks _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
